DSP: input mux (deprecated)¶
JP150PCB 1.3PCB 1.4generatedJan PřibyslavskýThis page does not apply to the product or PCB revision chosen in the header.
The input-routing addresses of the DSP program before the IPAT era. Deprecated since 26.8.0:
the firmware still serves the commands and uses the stored values when it writes the input
selection, but they bypass the DSP's parameter engine. New software selects inputs with
SYS:INPUT and writes parameters with DSP:IPAT:SETBLOCK. The values are stored settings.
Commands¶
| Command | Function | Parameter | Answer | Since | Boards |
|---|---|---|---|---|---|
DSP:INPUTMUX:ADDR? |
Address of the input-mux parameter | – | DSP:INPUTMUX:ADDR:<address> |
26.6.2 | 1.3, 1.4 |
DSP:INPUTMUX:ADDR |
Set the address of the input-mux parameter | 0..65535 |
no answer | 26.6.2 | 1.3, 1.4 |
DSP:INPUTMUX:I2S? |
Mux value of the I2S input | – | DSP:INPUTMUX:I2S:<value> |
26.6.2 | 1.3, 1.4 |
DSP:INPUTMUX:I2S |
Set the mux value of the I2S input | 0..255 |
no answer | 26.6.2 | 1.3, 1.4 |
DSP:INPUTMUX:WIFI? |
Mux value of the Wi-Fi input | – | DSP:INPUTMUX:WIFI:<value> |
26.6.2 | 1.3, 1.4 |
DSP:INPUTMUX:WIFI |
Set the mux value of the Wi-Fi input | 0..255 |
no answer | 26.6.2 | 1.3, 1.4 |
DSP:INPUTMUX:USB? |
Mux value of the USB input | – | DSP:INPUTMUX:USB:<value> |
26.6.2 | 1.3, 1.4 |
DSP:INPUTMUX:USB |
Set the mux value of the USB input | 0..255 |
no answer | 26.6.2 | 1.3, 1.4 |
DSP:INPUTMUX:BT? |
Mux value of the Bluetooth input | – | DSP:INPUTMUX:BT:<value> |
26.6.2 | 1.3, 1.4 |
DSP:INPUTMUX:BT |
Set the mux value of the Bluetooth input | 0..255 |
no answer | 26.6.2 | 1.3, 1.4 |
DSP:INPUTMUX:SPDIF? |
Mux value of the S/PDIF input | – | DSP:INPUTMUX:SPDIF:<value> |
26.6.2 | 1.3, 1.4 |
DSP:INPUTMUX:SPDIF |
Set the mux value of the S/PDIF input | 0..255 |
no answer | 26.6.2 | 1.3, 1.4 |
DSP:INPUTMUX:SINE? |
Mux value of the test tone | – | DSP:INPUTMUX:SINE:<value> |
26.6.2 | 1.3, 1.4 |
DSP:INPUTMUX:SINE |
Set the mux value of the test tone | 0..255 |
no answer | 26.6.2 | 1.3, 1.4 |
Since is the release the command appeared in; 26.6.2 is the oldest release documented here, so a command marked 26.6.2 may be older.
DSP:INPUTMUX:ADDR¶
Commands: DSP:INPUTMUX:ADDR?, DSP:INPUTMUX:ADDR
The parameter address the firmware writes when it selects an input without the IPAT. The default 52 (0x0034) matches the released DSP programs. Deprecated with the rest of the page.
Default: 52.
Per-source mux values¶
Commands: DSP:INPUTMUX:I2S?, DSP:INPUTMUX:I2S, DSP:INPUTMUX:WIFI?, DSP:INPUTMUX:WIFI, DSP:INPUTMUX:USB?, DSP:INPUTMUX:USB, DSP:INPUTMUX:BT?, DSP:INPUTMUX:BT, DSP:INPUTMUX:SPDIF?, DSP:INPUTMUX:SPDIF, DSP:INPUTMUX:SINE?, DSP:INPUTMUX:SINE
The six per-source values, one per input, are the numbers the firmware writes to the input-mux address when it selects that input. The defaults (I2S 0, WIFI 2, USB 4, BT 6, SPDIF 8, SINE 10) match the released DSP programs. A changed value is used from the next input selection on. Stored settings.
Default: 0.
Changes¶
- 26.6.2 (oldest release documented): 14 commands.